All pumps

Almatec · CXM Series · Plastic diaphragm pump

CXM10

The CXM10 is a plastic diaphragm pump from Almatec, part of the CXM Series. Up to 10 l/min, max. 7 bar, solids up to 1.5 mm, 3/8″ fluid connection.

Key data

Max. capacity
10l/min
Max. pressure
7bar
Max. particle size
1.5mm
Fluid connection
3/8″
  • Quiet and durable
  • NPT connection
  • ATEX and FDA compliant
Request a quote
Almatec_CMX-Serie

About the CXM Series

The CXM series diaphragm pumps are used primarily for applications where low to medium capacity pumping is required. This series was recently renewed (replaces CX and CXR) so that there are now four pump sizes available with an NPT connection and three with a BSP connection. This way you will always find the most suitable pump for your specific application!

Universal pump For smaller capacities

The pumps of the CXM series lend themselves specifically to light to medium duty applications. They are self-lubricating and very suitable for, for example, the emptying of containers and drums, or the transfer of, for example, inks, adhesives and cleaning agents.

duo-single

Specifications

Max. capacity 10 l/min
Max. pressure 7 bar
Max. particle size 1.5 mm
Max. temperature 70 °C
Max. compressed air pressure
7 bar
Max temperature:
70° C
Air connection
6 mm (1/4″)
Fluid connections
9.5 mm (3/8″)
Membranes
EPDM, NBR, PTFE/EPDM compound
Brand and series
Almatec · CXM Series
Type
Plastic diaphragm pump
Manual PDF Brochure PDF Datasheet PDF

Matching accessories

Air-treatment components in this pump's size — from filter regulator to dry-run protection.

All accessories

Questions about the CXM10?

  • How much can the CXM10 pump?

    The CXM10 pumps up to 10 l/min.

  • What is the maximum pressure of the CXM10?

    The maximum pressure of the CXM10 is 7 bar.

  • Can the CXM10 pump liquids with solids?

    Yes. The CXM10 handles solids up to 1.5 mm.

  • What fluid temperature can the CXM10 handle?

    The CXM10 handles fluids up to 70 °C.

  • Which diaphragm materials are available for the CXM10?

    The CXM10 is available with these diaphragm materials: EPDM, Buna-N, PTFE.

  • What connections does the CXM10 have?

    The CXM10 has a 6 mm (1/4″) air connection and a 9.5 mm (3/8″) fluid connection.

  • Is the CXM10 air-operated or electric?

    The CXM10 is air-operated: it runs on compressed air and needs no electrical connection.

Also check out these pumps

All Almatec pumps